rrhd Floor Lamps May 04th, 2018 - 10:35:28
Floor lamps can be defined as self- supporting and lighting fixtures. These are most often used as reading lamps and also as auxiliary light sources in a particular office space or living rooms. All modern floor lamps make good use of a solid base that is usually for supporting the lamp. Another other shield or a lamp shade is also used to diffuse and distract the light that is produced by all the bulbs. There are also various or multiple settings for different levels of illumination. These types of lamps are often used in a conjunction with the overhead lights in order to provide additional illumination and also a visual interest for the purpose of reading.
Knowing the goal of the lighting determines where and just how you put it and perhaps just how much you pay to buy. Do you really need light in a corner for accent then think of a more ornate colorful shade? Do you want a soft light is a baby`s room or soft light in a conversational sitting area then consider a torchiere style with the shade turned upward. Needless to say for reading go for a floor lamp that allows two to three light bulbs with a shade turned down. Remember the room balance in all of this. You can use the placement to balance the area for those who have other tall large furniture pieces on an opposite wall.
Of course there are many other kinds of antique floor lamps such as torchiere two light curved arm swing arm etc. Even the oldest and most dilapidated of these well built heirlooms can be brought back to life with some scrubbing sanding painting rewiring and sometimes soldering or welding.
One of the best reading lamps in the world was also designed circa 1920. It has been highly imitated but it still remains unchallenged. The Bridge Arm Floor Lamp or Bridge Lamp has a typical floor lamp design with metal base and upright standard which can take the form of various types of decorated tubing twisted iron rods etc. At the top of the standard is a decorative cast metal arm with a graceful arc or curvature which ends with an electrical socket pointing downward and covered by a fabric or glass shade. This has the effect of offsetting the light by about 14-18" from the upright standard at the same time lowering it so that it is closer to the reading material or work project. The result is an excellent reading lamp or work lamp which places the light bulb very near the task at hand. Many of these Bridge Arm Floor Lamps have convenient pull chains which hang below the bottom of the lamp shade for ease of operation.